Synergy + Firefly All-in-One Production System

The Synergy industrial pretreat module syncs up with the multi-lane Firefly conveyor dryer so your high-volume shop can pretreat and cure shirts with a minimum number of operators. Combined with the GTXpro B, it gives you the flexibility to scale up in short order to meet the demands of your growing business, but not before you have the volume to justify it.

Download BrochureCalculate Your ROI

Synergy + Firefly


 
 

Request a Demo

Learn about the Brother GTXpro printers and ancillary equipment from the comfort of your office or home. See a live demo of the full process from start to finish and get the answers to your questions from a DTG Specialists.

Request a Virtual Demo

 
 

Create your own shop layout with GTXpro B and the Synergy + Firefly system

  • Gtx-422/3 + 1 GTXpro B + SH + dryer

    • 65-75 pieces per hour
    • Up to 4 GTXpro B printers
    • 2 operators
    • Approx. 750 sq. ft.
  • 2-Lane Synergy + Firefly

    • 105-120 pieces per hour
    • Up to 6 GTXpro B printers
    • 2 operators
    • Approx. 625 sq. ft.
  • 3-Lane Synergy + Extra drone

    • 245–280 pieces per hour
    • Up to 9 GTXpro B printers
    • 4 operators
    • Approx. 870 sq. ft.
  • 3-Lane Synergy + Extra drone

    • 420-480 pieces per hour
    • Up to 12 GTXpro B printers
    • 5 operators
    • Approx. 870 sq. ft.
 
 

Let Brother help you design the ideal production set up for your business.

Dual Lane Setup

  • 65-75 pieces per hour
  • Up to 4 GTXpro B printers
  • 2 operators
  • Approx. 750 sq. ft.
Growth Potential:
Up to 6 GTXpro B printers with an additional heating drone (heating element) allows for up to 210 shirts per hour

Three Lane Setup

  • 175-190 piece per hour
  • 3-Lane with 6 GTXpro B printers
  • Labor: 3 employees
Growth Potential:
Up to 9 GTXpro B printers with an additional heating drone (heating element) allows for up to 380 shirts per hour

Multi-POD Setup

  • Contact Brother for output ranges
  • Multiple 3-Lane with 9 GTXpro B printers each
  • Labor: 4 employees per pod
Growth Potential:
Multiple production lines based upon business needs

Pretreat cured at 320°F for 60 seconds. 5 second heat press at 360 degrees F prior to printing. 11” × 11” design printed at 1200 × 1200 dpi in high speed print mode. Ink cured at 320°F for 3 minutes. Synergy and Firefly are Brown Manufacturing Group products and Brother International Corporation makes no representations or warranties regarding such products.